Palia on Mac

I’ve been casually playing Palia on my Switch for the past couple months. I’d heard it described as a “cozy” game, and I’m all about the cozy. You are a human in a fantasy realm, and you build a little house and farm. You hunt; you craft things; you cook food; you go fishing. There are some quests and puzzles along the way, but you don’t have to do those if you don’t want to. Nothing attacks you, and if you do manage to kill yourself (like by falling into deep water) it just resets you right nearby with no damage. I’m enjoying it.

Playing on the Switch has some downsides though. Eventually I noticed that in the chat, other players were sharing where special items could be found. But typing messages with a game controller is painful. It seemed like most other people were probably playing on their PCs. But I don’t have a PC. I have a Mac mini, and Palia doesn’t have a Mac client yet.

Palia on Mac launcherBUT! Apparently this is no longer a problem these days? I found some Reddit posts where people mentioned getting it to work on Mac using Whisky, which seemed doable. Then I found this Palia on Mac launcher that handles a lot of the setup for you. I kicked it off and installed Whisky, and followed the steps to setup a “bottle.” First problem: my bottle disappeared. I’m not sure what the issue was, but I tried it several times and they’d just vanish (but I could see the folders in the Finder). Eventually I reinstalled Whisky directly (rather than going through the launcher), and I went into the Finder and deleted the extra bottles. Suddenly my original one appeared. Yay! Then I went back to the launcher to finish the setup and download the game files. Second problem: the downloads would seem to hang with, like, no visual feedback what was happening. It looked like other folks on Reddit had similar issues, and that the key was just to keep restarting the launcher and it would continue where it left off. After leaving it alone for an hour or so today, it managed to get everything and the “Run” button appeared!

Palia on Mac

The game looks fantastic compared to the Switch. Mac mini is a lot more powerful, obviously! I was prepared for some glitchiness, but it was really minimal. I had one crash, but otherwise everything worked really smoothly. Rodd suggested I change it to play in a window rather than full screen, as on my wide monitor it was actually making me motion sick. But I’m going to just try to get used to it, because it looks so gorgeous.

At first I tried playing with keyboard and mouse, which took some getting used to. I just don’t have the muscle memory yet. I could see that it was really great for some things – choosing stuff from your inventory, moving around the map, chatting to other players – but for other things it felt a bit awkward. And fishing sucked – there was so much lag that I lost every fish I hooked. Eventually I hooked up a Bluetooth controller, and that gives the best of both worlds. I can run around and catch fish, but also easily switch over to the keyboard for tasks that need it.

Anyway, if you want to try it out, you can use my “Refer a friend” code and I might get some in-game swag for it. The game is free to play, but apparently you can use real money to buy, like, funky outfits and stuff. (You don’t need to though; I haven’t paid a cent!) Let me know if you start and I’ll friend you in there!

Mac mini + duckyPad

duckyPadWhen I handed back my work laptop a few months ago, it occurred to me that I needed a new computer. My 2015 MacBook Air is still going strong but it’s many, many years old, and I knew it would struggle with streaming or playing games. So off I went and merrily started pricing new MacBooks when I suddenly wondered… maybe I don’t actually need a laptop?!  It was a strange feeling. But I’ve got the Air and an iPad, and it’s not like I need to do work on the road. So I ended up choosing a Mac mini M2 Pro, and so far I’m really happy* with it.

I realised today though that I needed to update my duckyPad. Many of my shortcuts were related to work and therefore obsolete, and I also noticed that a few macros weren’t working anymore. So I downloaded the latest Mac ARM Configurator app and fired it up. Unfortunately it failed to connect to the duckyPad. Hmmm. I went through the troubleshooting and added some permissions, but that didn’t fix it. I also dug around in the official Discord to see if anybody had similar issues. I figured maybe there was some issue with the latest Macs, so my next approach was to plug it into the old MacBook Air, which still had an old version of the Configurator on it. That’s when I remembered that with the old version, you didn’t connect to the duckyPad directly but instead used an SD card reader. D’oh! As soon as I did that, it told me that my firmware was out-of-date. Makes sense.

I went back to the Mac mini and followed the instructions for updating the firmware, which included using Brew to install a utility. That worked perfectly and I was able to then flash the firmware, and as soon as that happened I was able to directly talk to the duckyPad. Brilliant! I was able to remove all the old work macros, set up some new ones, and fix the old ones. (It turns out that I was using “HOLD” in some of them, which has since been replaced by “EMUK.”) The only challenge is that the Configurator is oddly unresponsive when you’re editing. I had to often click multiple times to get it to register or to change focus. Not sure why that is. It works; it’s just super super slow. When I was done, I hit “Save” and the new config was written to the pad.

And incidentally – there’s a new duckyPad Pro coming! It’s got more keys, and knobs. I don’t really need it, but it looks cool.

* My only complaint about the Mac mini is that without a Mac laptop or keyboard, I don’t have Touch ID. That gets really annoying when typing my long master password into Strongbox. I’ve seen a few folks though that have hacked a standalone Touch ID button though… A project for another time. 🙂

Lethonomia

This word means the tendency to forget names. This is something I’ve struggled with a LOT in recent years. I’m not sure what the cause is: the fact that my jobs at YOW and AWS meant meeting so many people? Did I get long Covid? Or is it one of the many joys of perimenopause? Or maybe it’s just getting older… At any rate, it’s incredibly frustrating to be able to picture someone or something, to know you know the name, and just not be able to grasp it.

Video games I loved recently…

I’ve been on a real gaming tear this year. Back in January I wrote about Dave the Diver and Unpacking, and I thought I’d mention a few more Nintendo Switch games that I’ve been playing lately and really enjoyed:

  • Yoku’s Island Express – Rodd found this one recommended on Reddit for people who like no-stress platformers. You play a little bug postman who pushes a ball around an island, and it’s like a platformer crossed with pinball, two things I LOVE. The artwork and world building is really cool too.
  • Steamworld Dig 2 – Another fun platformer where you play a little robot exploring a (mostly) underground world, digging minerals and trying to solve a mystery. There were one or two places were I got stuck and had to look up how to solve something, but I managed to defeat the end boss today all on my own. Good times!
  • Palia – Anybody else playing this? I literally just rolled a character tonight. I’ve heard good things about it…

We also spent some time playing Breath of the Wild (a friend lent it to me) and I can see why it won so many awards. It just wasn’t for me, though. I struggled with all the different mechanics, and every time I picked it up I had to relearn how to do everything. There was just too much. I like something a bit more casual and low stress. If you’ve got recommendations, please share them!

Nightly Puzzling

For the past month, I’ve been establishing a new nightly routine. First, at 10pm I have an automatic reminder to write a journal entry. I’ve been using the iOS Journal app for this, which allows me to easily incorporate photos and maps from the day. I haven’t been using any of their prompts, but rather just jotting down what I did. I like being able to look back at everything I’ve done.

And then come the puzzles! Nothing like a little brain exercise to close out the day.

  • Both Rodd and I do the NYT Connections. Maybe this is a humblebrag, but I’m always surprised when I see people complain that it’s hard! We’ve actually been challenging each other to find the purple category earlier rather than leave it to last.
  • We also both do the five different daily puzzles over at Word Nerd. I’ve only managed to get all 23 Words like twice, and most days I struggle to hit 10. Rodd’s much better than me at that one! Maybe I’d have better luck earlier in the day with some caffeine in me. We also compete to see who can do the shortest Word Chain.
  • I do the Daily Waffle and Waffle Royale (and every now and then the Deluxe Weekly Waffle). These are Scrabble-style letter tile switching games, with a fun mechanism that highlights when letters are correct or jumbled up.
  • Rodd likes the OEC’s Pick 5 and Tradle games. These are where you have to identify which countries export certain goods. He’s really good at them both, but he thinks the Pick 5 is more fun.

Have you got any fun puzzle recommendations for us?

Switching mobile plans to Boost

When I was working full-time, I was fortunate in that my Australian employer had a generous mobile phone benefit. To maximise that, I did what most of my colleagues did – go to the nearest Telstra store and get a handset with the biggest plan that came under the cap. Now that I’m not working, I have to pay my own bills… and I know the Telstra plan is massive overkill for what I actually use. So I called them up, found out cost to pay out the rest of my contract, and worked out that it would be far more effective to switch over to a pre-paid 12-month Boost SIM. It uses the Telstra network and for $230 you get 170GB of data, unlimited Australian calls and texts, as well as unlimited calls to the US. I bought one of the SIMs at Coles and was able to port my number over and be up and running in less than an hour.

Mobile settingsHOWEVER! I did have one issue with my iPhone, and I thought I’d mention here in case it helps someone else. See my Settings here? Even after my existing number was ported, the Mobile settings still showed the phone number that came with the SIM (that +61 6… one). It wasn’t a huge problem; I double-checked by calling and SMSing Rodd that my ported number was being used correctly. It did screw up iMessage and FaceTime though, as my ported number wasn’t listed as an eligible Receiving option. I tried changing it (both in Settings -> Mobile and also Settings -> Phone -> My Number) but it wouldn’t save. I restarted the phone multiple times. I contacted Boost, who couldn’t see any issue on their side. The agent said he thought that something was just cached, and it would eventually fix itself. But it stayed that way for weeks… until I finally figured out the solution myself.

If you find yourself in the same situation, just go to Settings -> General -> Transfer or Reset iPhone. Click the Reset button (a bit scary, I know!) and then the “Reset Network Settings” option. It’ll ask you to confirm before it does it. And that fixed it! My ported number was finally showing for the SIM, and I was able to add it back to iMessage and FaceTime.

(And if you’re curious about the overseas SIMs showing there, those are eSIMs that I use when travelling. I’ve been using Airalo for my overseas data needs for the past couple years and I’m very happy with them. Much cheaper than paying Telstra’s $10/day charge!)

You have died of dysentery.

Friday night fun: watching a 90min documentary on “The Oregon Trail” educational video game. (I’m not even kidding. This was a massive nostalgia trip for me and I learned heaps about the Minnesota tech industry in the 70s and 80s.)

* Trivia – The phrase “You have died of dysentery” never actually appears in the game!

Computer Scientists Invent an Efficient New Way to Count

This is fascinating. I also really like the way they explain it, which makes it super clear and easy to understand!

Fixing your knitting mistakes

One of the hardest skills for new knitters to master is recognising and fixing errors. If you catch something quickly, you may be able to just un-knit (or “tink“) the last few stitches and fix it. But if you spot it a few rows later and you can’t face the thought of tinking all those stitches, you’ve really only got a few options: you can pull the needle out and rip several rows, but then you’ve got to pick all the live stitches back up. This can take a while, and depending on how thick/thin and fuzzy/smooth your yarn is it can be a real chore. (If you’re knitting anything complicated like lace where you have a high change of screwing something up, it’s highly recommended to put in lifelines every so often.) The other commonly used option is the nuclear one – ripping out the whole project and starting over. If you’re near the beginning, this may well be the fastest method.

But there is another way. Let me illustrate.

I spent a big chunk of hours yesterday working on a baby sweater. The body is stocking stitch, and then the top half has a pattern with columns of cables and garter stitch motifs. Here’s the photo I took at the end of the day:

Knitted baby sweater

When I was looking at the photo, I suddenly realised I’d screwed up one row of the pattern. Can you spot the mistake? Here I’ve isolated the two diamond motifs, outlined by the yellow and red stitch markers:

Even if you’re not a knitter, you can probably spot that they don’t match. I’ve somehow missed 4 purl stitches right through the middle of the motif on the right, which include the points at either side of the diamond.

The error occurred like 8 rows back, and while this yarn (Morris & Sons Empire 8ply in Aquamarine) would be relatively easy to pick up if I frogged those rows, reknitting the motifs would be a pain… and I’d be just as likely* to make a mistake again. So I decided instead to use the surgical method of dropping just the columns of stitches with the missing purls to correct them.

I don’t think this technique has a pithy name like tinking or frogging, but it’s often called “laddering down”. To illustrate, I’ve fixed 3 out of the 4 missing purls already and this photo shows me ready to correct the last one, the missing point of the diamond on the left. I’ve highlighted it in yellow. That knit stitch (looks like a V) should be a purl (looks like a horizontal bump). I’ve also shuffled my stitches around so that the column of stitches with the error is at the end of my left needle.

Screwed up diamond motif with highlight

Now it’s time to drop that stitch and allow it to “ladder down” to the spot of the error. (It’s called laddering because each row you undo leaves a horizontal bar.) This wool likes to stick to itself, so I encouraged it where needed with the use of a spare needle.

Laddering down the column of stitches

And here it is, down to the spot of the error. I’ve caught the live stitch that needs to be fixed with a crochet hook.

The spot of the error

Now it’s just a matter of changing this knit to a purl, and then working my way back up the ladder again. For each stitch, you pull the lowest rung of the ladder through the current live stitch. For knits, you go in from the front and pull the ladder through from the back. For purls, you come in through the back and pull the ladder through from the front. You can use spare needles for this, but a crochet hook makes it really fast. (The photo below looks like I’m about to knit the stitch, but rest assured I moved the hook around to purl instead.)

Fixing each stitch

Here it is halfway along, showing the corrected purl and then the column of knit stitches above:

Corrected stitches

I made a short video showing the last couple stitches:

And here’s the completed motif after the repairs:

Repaired motif

The only tricky bits are making sure you don’t drop down too many rows, and ensuring you don’t skip any rungs of the ladder on your way back up. I’ve even used this method to fix miscrossed cables! (Just drop down all the cable stitches, catch the live stitches on a spare needle, rearrange them correctly for the cross, and then ladder each one back up.) This technique can result in some wonky tension either side of the repaired column of stitches, but I find that a couple tugs on the work will fix it (and it’ll resolve itself during blocking anyway).

Much faster than tinking or frogging!

* The reason I made the mistake is that the damn pattern is an older one and it’s written out row-by-row without a chart. A chart would have taken up way less space and allow me to visually check for errors must easier. 😠 But this is something I’ve ranted about in the past

Volatile Quartets

From Metafilter I discovered this long retrospective on the Breeders and consequently went down a rabbit hole reading about the lineage from Throwing Muses to the Pixies to the Breeders and then Belly. I was a latecomer to these groups, getting first into the Breeders thanks to Last Splash and then moving on to Belly. I can remember driving home with my sister after high school tennis practice, belting out Belly’s King along to my car’s crappy cassette player…